Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Lennox, CA | Anaheim Locksmiths
We provide independent Medeco locksmith service across Lennox, from rekeys and key cutting to full cylinder rebuilds on the Maxum and M3 lines. The thing that makes our Medeco work here different is that we know how Lennox’s rental churn breaks these systems: the same Century and Hawthorne Boulevard buildings cycle tenants every year, and landlord master keys get stretched across units, gates, and storefronts that were never pinned as one system. We fix that. Call (855) 382-0290 for a free estimate.
Why Lennox Residents Choose Us for Medeco Service
Medeco is not a lock you want a generalist guessing at. The Biaxial sidebar, the rotating pins, the tight key-control tolerances: get any of it wrong and you have a dead cylinder and a tenant who cannot get into their unit. We have spent years servicing Medeco’s high-security cylinders across South Bay rental and commercial properties, and we know the platform well enough to troubleshoot everything from a worn cam to a mis-cut key without guessing. We are an independent shop, not affiliated with or authorized by Medeco, so our loyalty is to getting your hardware working, not to selling you a new system.
Noel Camacho, our lead locksmith, grew up in the Anaheim Colony neighborhood and learned the fundamentals at Cypress College before spending close to two decades doing residential, automotive, and commercial locksmith work across the surrounding cities. Tell me what you’ve got. I’ve seen it before, and we’ll get it handled. That is how he talks on a job call, and it is how the whole team works. On Medeco hardware in Lennox, we would rather rebuild a cylinder with genuine OEM pins than sell you a replacement you do not need. For more on what we service, see Medeco sales & service.
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in Lennox
Most Medeco failures in Lennox are not catastrophic. They are slow, annoying, and often caused by the same handful of local conditions. Here is what we see most:
- Grit-packed keyways on exterior gate cylinders. Lennox sits under the LAX flight path and against the 405 corridor, so fine dust settles into everything exposed. Exterior Medeco gate cylinders on Condon and Inglewood Avenue apartment buildings collect it in the keyway, and keys start turning hard or binding halfway. We clean and lubricate with the right compound, not whatever is on the shelf.
- Mis-cut duplicate keys chewing up the sidebar. Medeco keys are expensive to duplicate, so tenants and handymen try to save money with a cheap copy. A slightly off Biaxial cut will work until it does not, then it starts wearing the pins and sidebar. By the time a landlord calls us, the cylinder often needs a rebuild, not just a new key.
- Dried-out lubrication on older Biaxial and Original cylinders. Lennox has a mild, dry coastal-basin climate with little rain. That means low rust, but it also means the internal lubrication in mid-century locksets dries out over decades. We see rotating-pin cams that stick and sidebars that fail to release because the original grease has turned to paste.
- Master-key systems that fail door by door. This is the Lennox specialty. A manager on Century Boulevard called us because her Medeco master key would open the front gate and two units but not the rest of a mid-century stucco building’s doors. We pulled the cylinders, found the pin stacks had been layered by different installers over the years on worn Biaxial cores, and rebuilt the system with genuine Medeco pins so one master key again worked every unit and gate. We also cleaned and lubricated the exterior gate cylinder, which had grit packed into the keyway from the dust off the boulevard.
- Worn strike plates and misaligned hollow-metal doors. Most Lennox storefronts and apartment entries use older hollow-metal doors with original hardware. When the door sags or the strike plate wears, even a healthy Medeco deadbolt will not throw cleanly. We address the alignment, not just the lock.
Medeco Service in Lennox: What Local Conditions Mean for Your Equipment
Here is the thing a generic Medeco page will not tell you. Lennox is a dense, unincorporated pocket of the South Bay wedged between Inglewood and Hawthorne. The housing stock is mostly mid-century stucco apartment buildings and duplexes from the 1950s through the 1970s, with original knob-and-deadbolt hardware and gated carports. The rental turnover is constant, which means landlord-installed Medeco master systems get stretched and re-pinned by different hands every time a tenant moves out. A manager buys a Medeco system for four units, then adds two more units and a gate, then a storefront, each pinned by a different locksmith or handyman. After a few years, the master key opens the gate and half the doors. The pin stacks were layered on top of an aging cylinder, and key control breaks down incrementally. That specific failure pattern, master key erosion across a mixed-use Century Boulevard apartment block, is the bread-and-butter Medeco repair in Lennox. It is a different job from the single-family high-security install you would see in an owner-occupied city.
Medeco Models & Products We Service in Lennox
We work on the full Medeco high-security range: the Medeco Maxum deadbolt line for residential and commercial applications, the Medeco Original Biaxial cylinder, and the M3 and M3+ keyway cylinders. When a cylinder is a true high-security unit, we use genuine Medeco OEM pins, springs, and keys. Aftermarket parts do not hold the tolerances that make the platform secure, and we are not going to put a cheap pin in a lock that exists specifically because cheap pins get picked. When a cylinder is worn past the point where a clean rebuild makes sense, we tell you plainly and quote a replace. We do not rebuild a dead sidebar just to sell you a service call. We keep a working stock of OEM Medeco components for the common model lines, so most Lennox repairs happen in one visit.
Medeco Service Pricing in Lennox
Medeco work is not priced like a Kwikset rekey, and it should not be. The cylinders are more complex, the parts are OEM, and the labor involves precision pinning, not just swapping a plug. In Lennox, you can expect:
| Service | Typical Range |
|---|---|
| Rekey a single Medeco cylinder | $35 – $75 |
| Rekey 3 – 5 Medeco cylinders (common Lennox unit/gate combo) | $105 – $275 |
| Medeco key duplication (per key, OEM blank) | $18 – $40 |
| Master key system setup or rebuild | $120 – $400+ depending on cylinder count |
These are honest ranges, not teaser prices. What you are quoted on the phone is the price on the invoice. No call-out surcharge added on arrival. For an exact quote on your building’s setup, call (855) 382-0290. Estimates are free.
Serving Lennox, CA — Our Local Coverage Area
We’re based in the Lennox area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Lennox
Yes, and that is one of the most common jobs we do in Lennox. We re-pin each cylinder with genuine Medeco pins to match your master key hierarchy. If the existing system was layered by multiple installers, we may need to rebuild some cylinders rather than simply rekey them. Call (855) 382-0290 and we will walk through what you have.
Usually it is dirt. Lennox’s dry coastal air and fine dust from the LAX-adjacent flight path and nearby freeways get into exterior cylinders, especially gate locks on buildings near our Medeco repair in El Segundo service corridor. We clean and lubricate first. If the pins or sidebar are worn, we rebuild. A hard-turning Medeco is rarely a replace-the-lock situation.
Medeco keys are cut at angles, not just depths, because the system uses rotating pins and a sidebar. A standard key machine cannot reproduce those angles accurately. You need OEM blanks and a machine set up for Medeco’s tolerances. Cheap duplicates are often off by a few thousandths, which is enough to wear out the cylinder over time. We cut Medeco keys the right way, and we tell you if an existing duplicate is doing damage.
Yes. Lennox has a lot of small commercial strips along Century and Hawthorne Boulevards, and we handle Medeco cylinders on hollow-metal storefront doors, gates, and back-of-house entry hardware. The door alignment and strike plate condition matter just as much as the cylinder, so we address both.
We can. Bring in an existing key, or have us pull a cylinder, and we will cut and program a match using OEM Medeco blanks. If the lock is on the M3 or M3+ platform, we verify the keyway profile before cutting so you do not end up with a key that only half-inserts. Call (855) 382-0290 and we will confirm the model over the phone.
Service Areas Near Lennox
We handle Medeco service throughout the South Bay and nearby cities. If you manage properties or run a storefront just outside Lennox, we cover Lennox service area, plus Inglewood, Hawthorne, Lawndale, El Segundo, and the broader 90304 corridor. For Medeco owners further east, see Medeco service in Rancho Cucamonga and Medeco service in San Antonio Heights.
Book Your Medeco Service in Lennox Today
If your Medeco master key does not open what it used to, or a tenant key is binding in a gate cylinder, call (855) 382-0290. We quote the full price before anyone is dispatched, and same-day service is available for most Lennox calls. High-security brands, handled right.
Written by Noel Camacho, Owner at Anaheim Locksmiths, serving Lennox and the surrounding South Bay.